Autoclave

Features
Features	a) Steam Temp. 121.4 oC at 15 psi.
Specification	As per BS 2646-5:1993. Autoclaves for sterilization in laboratories Methods of Test for function and performance.  The Energy from the water is transferred into high pressure steam inside the Stainless steel chamber up to 15-psi pressure or 121.4oC temperature. The Chamber (electrical) is fill with clean water for sterilization. This heat process generated chemical free steam for sterilization.
Temp Controller	PID (Optional: Combined Temp. Pressure & water level Controller)
Pressure Controller	Mechanically operated pressure/steam release valve.
Pressure Gauge	Analog Dial type Pressure Gauge (Optional: Digital Pressure Meter)
Temperature Sensor	Standard coupling type PT 100 Sensor
Heat Exchanger	The electrical heat exchanger transfer latent heat to the clean fill water to generated steam under pressure.
Water Level Control	Low water level cut off electronic circuit protects the electrical heat exchanger from low water level inside the chamber, this Cut's off the power supply to the heat exchanger.
Steam Outlet	Steam generated from the unit is raised and exits thought the electrically operated steam Purging solenoid valve from the outlet

Models
Capacity	35 ltrs	52 ltrs	119 ltrs	178 ltrs	213 ltrs
Inner Size	30 dia X 50 h	35 dia X 55 h	40 dia X 75 h	55 dia X 75 h	55 dia X 90 h
Inner Chamber	Stainless Steel 304 quality
External	Stainless Steel 304 quality
Range	Ambient to 15 psi pressure / 121.40C
Controller	PID (Optional: Combined Temp. Pressure & water level Controller)
Sensor	PT 100
Accuracy	+/-1.oC
Uniformity	+/-0.5oC
Max. Ramp up time	45 min. up to 121.40C without load with respect to ambient
Insulation	Air Bank 50 mm
Top Lid	With Dome Shape Die press Stainless Steel Plate
Optional
Printer Output	Printer output port RS232
Validation Facility	Data logging facility for temperature validation report.
Capacity (Watts)	2000	3000	4000	5000	6000
Power Consumption	10 amps	15 amps	20 amps	25 amps	30 amps
Net Weight approx.	15kgs	20kgs	30kgs	50kgs	55kgs
Electric requirements AC230 V & 50Hz cycle.

Bod Shaker

Temperature Range	Amb+5º C to 60º C	5º C to 60º C	Amb+5º C to 60º C	5º C to 60º C
Temp Accuracy	± 0.5ºC	± 0.5ºC	± 0.5ºC	± 0.5ºC
Temp Control	Micro controller	Micro controller	PLC controller	PLC  controller
Standard platform Size	420x420 mm	420x420 mm	420x420 mm	4420x420mm
Max. Capacity	1000 ml	1000 ml	1000 ml	1000 ml
Shaking Speed	30-400 RPM	30-400 RPM	30-400 RPM	30-400 RPM
Shaking Motion	Orbital	Orbital	Orbital	Orbital
Shaking Amplitude	25 mm	25 mm	25 mm	25 mm

The important components of our incubator shakers are cited below:
• PID controller for internal temperature control with variation within ± 0.5° C
• Unique air flow system for even temperature distribution
• Temperature stability and reduced energy consumption through foamed - in place CFC free PUF insulation
• Triple eccentric drive ensures long life and smooth operation
• Maintenance-free PMDC motor
• Stainless steel inner chamber
• Audio visual alarm for controlling temperature and RPM deviation from the set value

Some of the details regarding construction of cabinet and refrigeration system are:
• Cabinet insulated with high density CFC free poly urethane foam
• Interior of chambers is fabricated using mirror finish stainless steel Chamber exterior made of white powder coated mild steel
• Door provided with magnetic gasket and a keyed door lock
• Inside storage facilitated through stainless steel trays
• Hermitically sealed compressor for superior cooling
• GMP models also available in total stainless steel body (Inside S. S 316 with mirror finished and outside S 304 dull finish)

Shaking Assembly	Electric pulley mechanism
Platform	Adjustable stainless Steel
Flask Holder	Spring type clamp arrangement
Digital RPM Indicator	50 to 250 RPM or Customized  (Regulator Controlled)
Stroke	25 to30 mm displacement
Shaking Motion	Orbital

Hot air oven

Inner Size Size in Inches (W X D X H)	No.of Shelves	Capacity In LTR	Rating Watts
12"x12"x12"	1	27	800
14"x14"x14"	2	42	1200
18"x18"x18"	3	90	2000
18"x18"x24"	4	120	2500
24"x24X"24"	4	215	3000
24"x24"x36"	5	320	3500

• Triple walled Unit.
• Inner chamber made of S.S.304
• Outer chamber of Mild Steel with Powder coating.
• Gap Between the two walls filled with glass wool insulation to avoid heat loses of 65 mm
• Heating element Are Made of high grade chrome plated nichrome wire.
• Heaters are placed ate the right & left side of the inner chamber
• Air Ventilation is placed on top of both sides to remove heat gases and fumes.
• Control Switch & pilot lamps are fitted on front panel
• Supplied with G.I. Wire mesh Jali.
• PID controller for internal temperature control with variation within ± 0.5° C

Humidity chamber

CAPACITY	INTERNAL DIMENSION W  X D  X H  [cms ]	EXTERNAL DIMENSION W   X  D  X  H [cms]	SHELVES
4 Cu.Ft.  [120 Ltrs]	45  x  45  x  60	64 X 97 X 140	02
6 Cu.Ft.  [165 Ltrs]	50  x  50  x  70	69 X 102 X 150	02
10 Cu.Ft.  [ 280 Ltrs]	55  x  55  x  90	74 X 107 X 170	03
12 Cu.Ft.  [ 324 Ltrs]	60  x  60  x  90	79 X 112 X 170	03
16 Cu.Ft.  [ 440 Ltrs]	60  x  60  x 125	79 X 112 X 205	04
29 Cu.Ft.  [ 800 Ltrs]	80  x  80  x 125	99 X 132 X 205	05

TEMPERATURE RANGE : 10°c to 60°c
TEMPERATURE ACCURACY :± 0.1°c
TEMPERATURE UNIFORMITY :± 0.5° c
HUMIDITY RANGE : 40% to 95% RH
HUMIDITY ACCURACY : ± 5% RH
HUMIDITY UNIFORMITY : ± 3% RH

OPTIONAL TECHNICAL SPECIFICATIONS :
Material of Construction: Inside S.S. & Outside S.S. Inside S.S. & Outside GI Powder Coat Finish.
Humidity Range : 40% RH to 98% RH
Temp. Range # : 100C to 600C
Accuracy Temp. / RH : + 0.20C & + 3% RH
Low temp. Range: -250C / -150C / -100C & 00C & 35% RH on request.)
Same as above but with PC software & connectivity

Laboratory stirrer

Laboratory Stirrer :
Make “Galaxy”: Overhead Stirrer for liquid material stirring: Day & night use, small but high torque, compact, does not allow corrosive fume inside the motor, noiseless, remains all time cool, reverse forward facility, low speed constant stirring, trouble free, long lasting and maintenance free, no carbon brush wear & tear in years to come. Stirrers are as good as flame proof, consumes low electricity, no shock hazard, withstand any voltage fluctuation, runs on 230-volt single phase AC supply to regulator box. Regulator box converts 230 Volt into low Volt DC because Motor runs on low Volt D.C., Supplied with variable speed remote control regulator box.

Model No	Torque equi H.P	Variable RPM	Power consump Watt	Stirring capacity in Ltrs With 4” single blade
	1/8	60 to 500	35	5	10	20
	1/6	60 to 500	50	10	20	50
	1/4	60 to 500	70	20	50	100

On demand maximum RPM 1500 or 3000 available without any change in price.
Available in price with stand & without stand. Also available in RPM Display.

Laboratory Stirrer ( Gear Reduction ):
Overhead Stirrer for liquid material stirring: Day & night use, small but high torque, compact, does not allow corrosive fume inside the motor, noiseless, remains all time cool, reverse forward facility, low speed constant stirring, trouble free, long lasting and maintenance free, no carbon brush wear & tear in years to come. Stirrers are as good as flame proof, consumes low electricity, no shock hazard, withstand any voltage fluctuation, runs on 230-volt single phase AC supply to regulator box. Regulator box converts 230 Volt into low Volt DC because Motor runs on low Volt D.C., Supplied with variable speed remote control regulator box.

Model No	Torque Equivalent to HP	Variable RPM Gear Reduction	Consumtion Watts	Stirring capacity in ltrs. Viscous
3 A(G)	1/8	40 to 500	70	5 to 10
4 A(G)	1/6	40 to 500	90	10 to 20
6 A(G)	1/4	40 to 300	120	20 to 50

Laminar Air flow

Working area Size 90 x 60 x 60 cm.
Working area Size 120 x 60 x 60 cm.
Working area Size 180 x 60 x 60 cm.

Laminar Air Flow (Vertical) complete S.S. 60x60x60cm
Laminar Air Flow (Vertical) complete S.S. 90x60x60cm
Laminar Air Flow (Vertical) complete S.S. 120x60x60cm

Direction of Flow: Horizontal

• Direction of flow: Horizontal
• Cleanliness: CLASS 100
• Velocity: 90 FPM + / -20%
• Hepa Filter: Size and QTY. will depend on the Size selected
• Particle retention: Above 0. 3 micron
• Blower Assembly: 1 / 3 HP, 1440 RPM
• Noise level: 65 decibel + / -5%
• Rate of air flow: 0. 40 to 0. 75 M / Sec. (90 FPM)
Vibration level: < 2. 5 micron

Magnatic Stirriar

This group of magnetic stirrers is similar to the conventional magnetic stirrers but have additional hot plate to achieve heating of solutions to be stirred. The heating is controlled by energy regulator, which ensures regulation at any desired percentage of the capacity of heater.

• Maximum Speed RPM: 1800
• Stirring Capacity Ltrs: 5 liter
• Heating Capacity Watts 500
• Dimension ( W x D x H ) mm 190 x190 x 170
• Stirring Paddle ØxL mm: 10 x 50

Muffel furnace

Industrial muffle furnaces are specially designed to suit IS & ASTM Standard. IT is applied in growing fields of Medical research, agricultural, industrial, metal treatment, ash determination & wool industries.

Technical Specification:
• Outside Body made of M.S. Sheet powder coated
• Inner muffle of Ceramic with high grade ceramic instillation
• Door insulation of HFK brinks
• Heating element are made from kant hal A1 Wire
• A Uniform distribution through all 4 sides with mental wire
• Max. Working temp up to 1160 ˚C
• Equipped with PID temp. Controller cum indicator with indicating lamps & switches
• A special type of thermocouple Used for better life and accuracy
• Power supply 230 Volts, 50 H2

Optional Accessories:
• Digital Timer
• PID Profile controller for ramp- soak timer
• PID Controller with printer or computer interface.

Sizes available for industrial muffle furnaces are as below.

Inner Dimension	Outer Dimension	Rating K. W.	Power consumer	Net weight Aprox
9"x4"x4"	18"x14"x14"	2	9	30 KG
10"X5"X5"	19"X15"X15"	2.5	11	40 KG
12"X6"X6"	21"X17"X17"	3.5	15	55 KG
18"X9"X9"	28"X20"X20"	6	26	80 KG

Rotary shaker

• Used for shaking Erlyn Meyer Conical Flasks with S.S. Lotus Clamps.
• Powered by continuous duty, variable speed self cooled PMDC Motor with adjustable Orbital speed from 50 to 200 RPM.
• Provided with DIGITAL RPM Indicator & DIGITAL Timer up to 999 min.
• Unit works on 230 V AC, 50 Hz. Supply.

CAPACITY	FLASKS	CAPACITY	FLASKS
250ml/500ml	09	1000 ml	09
250ml/500ml	12	1000 ml	12
250ml/500ml	16	1000 ml	16
250ml/500ml	25	1000 ml	25
250ml/500ml	36	1000 ml	36

HEAVY DUTY MODEL
• Used for shaking Erlyn Meyer Conical Flasks with S.S. Lotus Clamps.
• Incorporated with heavy duty AC Brushless motor & gear box arrangement with Variable Frequency Drive (VFD) to control the orbital motion speed from 50 to 200 RPM.
• The shaking assembly comprises of heavy duty a eccentric drive arrangement placed at the centre and ball bearing attachment placed on the four sides of the shaker.
• These Shakers are sturdy and specifically designed for continuous heavy duty operations in production facilities.
• Provided with DIGITAL RPM Indicator & DIGITAL Timer upto 999 min.
• Unit works on 230 V AC, 50 Hz. Supply OR 440 3 Phase supply.

CAPACITY	FLASKS	CAPACITY	FLASKS
250ml/500ml	36	1000 ml	36
250ml/500ml	49	1000 ml	49
250ml/500ml	64	1000 ml	64
250ml/500ml	100	1000 ml	100

OPTIONAL : Digital Timer upto 999 min AC Brushless Motor with Variable Frequency Drive in lieu of PMDC Motor for heavy duty operations

Tensile Testor

Computerized Tensile Testing Machines (Model 1.3D & 1.4F)

With the help of our Testing Machines, following tests can be performed on any work-piece on various parameters without affecting to the control panel:
• Tensile strength
• Compressive strength
• Flexural
• Shear
• Bend
• Bond
• Hysteresis
• Modulus

Optional Future:
• Maximum load (Optional)
• Break load (Optional)
• Modulus of elasticity (Optional)
• Yield point (Optional)
• Graph for the materials (dumbbell shape or round bar shape) (Optional)
• Force measurement available in Kgf or Newton (Optional)

These Testing Machines can also be used to show various test results reports of following:
• Yield load
• Yield extension
• Break load
• Break extension
• Maximum stress
• Stress yield
• Stress break
• Maximum load
• Percentage extension
• Modulus of elasticityl following:
The display unit of the machine can show more than one graph on the screen in different colors, so that 6 to 7 graphs of same material can be compared. Accuracy: +/- 1% and 1/10th of scale value.

Digital Tensile Tester (Model 1.5 G )

These products include following:
• Yarns, Man made Yarns, Nylon & Fabrics
• Cables & Conductors
• Rubber Products, Polyethylene, Polypropylene
• Teflon Products, Metal & Non-Metal Products
• LLDPE, HDPE, MDPE Pipes
• Woven Sack
• Paper Products, Card Board Products and Plywood
Our machines are good in each aspect including appropriate capacity, traverse speed, and grip separation. This ensures that our complete range in manufactured in compliance with international standards such as BIS, BS, ASTM, DIN or ISO standards.
These machines have been calibrated as per the IS-1828(Part-1)2005.

Other technical details:
• Our digital display unit having LED display which shows load, elongation and last samples maximum load.
• Two standard speeds are provided with these machines and an AC variable drive can also be provided if required, at extra cost, for getting variable speeds.
• A series of tests such as tensile, compressive, flexural, shear and bend test can be carried out without affecting the panel.
• Force measurement is available either in KGF or Newton depending upon the order.
Available test range: 500 Grams to 10000 Kgf.(Three Modals)
Accuracy: +/- 1% and 1/10th of scale value

Digital Tensile Tester (Model 1.5 G )

These Testers are widely used in various industries for testing tensile strength and elongation of a number of products such as
• Cables & Conductors
• Yarns, Man made Yarns, Nylon and Fabrics
• Rubber Products, Polyethylene and Polypropylene
• Teflon Products, Metal & Non-Metal Products
• Paper Products, Card Board Products and Plywood
• Woven Sack
• LLDPE, HDPE, MDPE Pipes
These machines should be chosen keeping in mind appropriate capacity, traverse speed, and grip separation so that the required material can be tested on this machine in accordance with BIS, BS, ASTM, DIN or ISO standards.
Digital Tensile Testers has been Calibrated as per the IS-1828(Part-1)2005.
• The grips or fixtures are designed for various products and materials that conforms the compatibility of these machines to set industry standards and clients requirements.

Other technical details:
• The digital display unit having LED display which shows load, elongation and last samples maximum load.
• Tensile, compressive, flexural, shear, bend test can be carried out without affecting the panel.
• Two standard speeds are provided with these machines. An AC variable drive can also be provided to get variable speed as per the client's requirement.
Available test range: 500 Grams to 10000 Kgf.
Accuracy: +/- 1 % and 1 /10th of scale value.

Vaccum Oven

Double walled, Outer Body made of Mild steel duly powder coated and working chamber made of cylindrical shaper Heavy gauge of Stainless Steel. A glass Window made of Toughened glass for viewing without opening the Door. Temperature is controlled by PID controller cum indicator from room temperature 50 C TO 150 C. Front panel fitted with Vacuum Gauge, Vacuum Valves Indicator Lamp 220 Volts A.C supplied with removable shelve.

(INSIDE CHAMBER ROUND SHAPE) DIA x DEPTH
(a) 200 mm x 200 mm
(b) 250 mm x 250 mm
(c) 250 mm x 300 mm
(d) 300 mm x 300 mm

Outer body made of Stainless Steel LM-304 grade [20 swg.] and cylindrically shaped Inner Chamber made of heavy gauge Stainless Steel mirror finish
• Microprocessor based AUTO TUNING PID Digital Temperature Indicating Controller for precise Temperature control with BUILTIN Timer.
• Shelves are made of Stainless Steel
• Provided with Validation Documents

Square Size
Chamber Size (W*H*D)		Ratting Watt
8”*8”*12”	20*20*30	1000	2
12”*12”*12”	30*30*30	1250	2
12”*12”*16”	30*30*40	1500	2
14”*14”*20”	40*40*50	1750	3
18”*18”*24”	45*45*60	2500	3
20”*20”*30”	50*50*75	3000	4

Round Type
Chamber Size (W*H*D)	Chamber Size in mm (W*H*D)	Ratting Watt
9”	200*200
	250*250
	250*300
	300*300

Water Bath

Low Temperature Water Bath, Rectangular Water Bath, Constant Temperature Water Bath, Viscosity Bath, Digital Oil Bath, Low Temperature Bath
Rectangular water bath is useful for boiling and general purpose work. Rectangular Water Bath is made up of long lasting single walled kettle element. Made of thick gauge stainless steel, the lid is having 6 or 12 holes with concentric rings.

Size	Rating Watts	Holes
35 x 25 x 10 cm	1000	6 Hole of 3"Dia
40 x 30 x 10 cm	1500	12 Hole of 3"Dia

Specification
Maximum Temperature	Ambient to 100ºC
Sensitivity	+0.5ºC
Temperature	Ambient +5ºC to 95ºC
Size of Bath	300X250X130 mm
Capacity of water in the Bath	08 Liters
No. Of Beakers with Lids	06 Nos.
Capacity of the Beakers	500ml.( ±50ml.)
Wattage of Heater	1.5 K.W.
Power Supply	220 Volts, Single Phase, 50 HZ, AC Supply
Holes	75mm with steps of 25mm
Timer	Optional

Universal water Bath

Specification
Temperature	Ambient 0 to 95ºC
Timer	Optional
Capacity	15 Liters
Controller	PID
Accuracy	±0.2ºC
Sensor	Liquid expansion capillary
Insulation	Glass wool
Size	325 mm (L) X240 mm (B) X180 mm (D